command
Use the command
Chef InSpec audit resource to test an arbitrary command that is run on the system.
Availability
Installation
This resource is distributed along with Chef InSpec itself. You can use it automatically.
Version
This resource first became available in v1.0.0 of InSpec.
Syntax
A command
resource block declares a command to be run, one (or more) expected values, and the location to which that output is sent:
describe command('command') do
it { should exist }
its('property') { should eq 'value' }
end
where
'command'
must specify a command to be run'property'
is one ofexit_status
,stderr
, orstdout
'output'
tests the output of the command run on the system versus the output value stated in the test
Property Examples
The following examples show how to use this Chef InSpec audit resource.
exit_status
The exit_status
property tests the exit status for the command:
its('exit_status') { should eq 123 }
stderr
The stderr
property tests results of the command as returned in standard error (stderr):
its('stderr') { should eq 'error' }
stdout
The stdout
property tests results of the command as returned in standard output (stdout). The following example shows matching output using a regular expression:
describe command('echo 1') do
its('stdout') { should match (/[0-9]/) }
end
Test standard output (stdout)
describe command('echo hello') do
its('stdout') { should eq "hello\n" }
its('stderr') { should eq '' }
its('exit_status') { should eq 0 }
end
Test standard error (stderr)
describe command('>&2 echo error') do
its('stdout') { should eq '' }
its('stderr') { should eq "error\n" }
its('exit_status') { should eq 0 }
end
Test an exit status code
describe command('exit 123') do
its('stdout') { should eq '' }
its('stderr') { should eq '' }
its('exit_status') { should eq 123 }
end
Test if the command shell exists
describe command('/bin/sh').exist? do
it { should eq true }
end
Test for a command that should not exist
describe command('this is not existing').exist? do
it { should eq false }
end
Test for PostgreSQL database running a RC, development, or beta release
describe command('psql -V') do
its('stdout') { should eq '/RC/' }
its('stdout') { should_not eq '/DEVEL/' }
its('stdout') { should_not eq '/BETA/' }
end
Verify NTP
The following example shows how to use the file
audit resource to verify if the ntp.conf
and leap-seconds
files are present, and then the command
resource to verify if NTP is installed and running:
describe file('/etc/ntp.conf') do
it { should be_file }
end
describe file('/etc/ntp.leapseconds') do
it { should be_file }
end
describe command('pgrep ntp') do
its('exit_status') { should eq 0 }
end
Verify WiX
Wix includes several tools – such as candle
(preprocesses and compiles source files into object files), light
(links and binds object files to an installer database), and heat
(harvests files from various input formats). The following example uses a whitespace array and the file
audit resource to verify if these three tools are present:
%w(
candle.exe
heat.exe
light.exe
).each do |utility|
describe file("C:/wix/##{utility}") do
it { should be_file }
end
end
Redacting Sensitive Commands
By default the command that is ran is shown in the Chef InSpec output. This can be problematic if the command contains sensitive arguments such as a password. These sensitive parts can be redacted by passing in redact_regex
and a regular expression to redact. Optionally, you can use 2 capture groups to fine tune what is redacted.
The following examples show how to use redact_regex
:
# Example without capture groups
describe command('myapp -p secretpassword -d no_redact', redact_regex: /-p .* -d/) do
its('exit_status') { should cmp 0 }
end
# Result (no capture groups used)
Command: `myapp REDACTED no_redact`
✔ exit_status should cmp == 0
# Example with capture groups
# Each set of parenthesis is a capture group.
# Anything in the two capture groups will not be 'REDACTED'
describe command('myapp -p secretpassword -d no_redact', redact_regex: /(-p ).*( -d)/) do
its('exit_status') { should cmp 0 }
end
# Result (capture groups used)
Command: `myapp -p REDACTED -d no_redact`
✔ exit_status should cmp == 0
For more info/help on regular expressions, we recommend RegExr
Matchers
For a full list of available matchers, please visit our matchers page.
exist
The exist
matcher tests if a command may be run on the system:
it { should exist }